VELTRIX MICROCENTER MC-925
The absolute synergy of simultaneous turning and 5-axis machining.
The MC-925 is a 5- to 6-axis linear motor machining center combining milling and turning, dedicated to the machining of complex prismatic parts. Its high dynamics and thermal stability make it a highly productive platform for manufacturing high value-added parts requiring precision and excellent surface finish. Thanks to its two dividers, it enables turning and milling operations with high angular resolution — from aerospace turbine components to orthopedic implants.
Typical applications include aluminum turbine housings, steel carters and distributors, titanium knee replacement components, PEEK tibial plates, medical steel orthopedic plates, and cobalt-chrome dental bridges.
Key Features
- "Full Linear" technology — axes equipped with direct-drive motors
- High-performance motorized spindle with speeds of up to approximately 45,000 rpm
- Machining of parts up to approximately 210 mm in diameter
- C-axis dividers enabling turning capacities of up to approximately 4,250 rpm
- Maximum capacity of approximately 125 on-board tools to optimize machining rates
Technical Data — MC-925
| Specification | Veltrix Published Value |
|---|---|
| Main Linear Axes — Travel X / Y / Z | 415 / 210 / 400 mm |
| Max. Feed Speed | 43 m/min |
| Resolution | 0.0135 µm |
| Pivot Axis B — Drive Type | Torque motor |
| Pivot Axis B — Angular Movement | -100° to + 30° |
| Pivot Axis B — Max. Feed Speed | 130 rpm |
| Pivot Axis B — Resolution | 0.0001° |
| C-Axis Divider — Drive Type | Torque motor |
| C-Axis Divider — S1 / Rated Torque | 20 Nm / 40 Nm |
| C-Axis Divider — Milling Mode Speed | 205 rpm |
| C-Axis Divider — Turning Mode Speed | 4,250 rpm (3,200 rpm continuous) |
| C-Axis Divider — Tray Diameter / Load Capacity | Ø195 mm / 15 kg |
| Motorized Spindle Interface | HSK-E40 (HSK-A40 / CAPTO C4 optional) |
| Max. Spindle Speed | 32,400 rpm (45,400 rpm optional) |
| Spindle Lubrication | Air-oil (grease optional) |
| Spindle Resolution | ±0.02° |
| DTS (Dynamic Thermal Stabilization) | Integrated |
| Tool Magazine Capacity | 50 tools (74/99/125 optional) |
| Tool-to-Tool Changeover | 0.8 sec |
| Chip-to-Chip Change | < 3 sec |
| Numerical Control | FANUC 31i-B5 PLUS iHMI Pro or HEIDENHAIN TNC 7 |
| Overall Dimensions (L x W x H) | 2,000 x 2,300 x 2,450 mm |
| Floor Area | 4.2 m² |
Detailed technical specifications can be provided upon request. Specifications and features are subject to change without prior notice. Optional accessories and special configurations can be offered on request. Final specifications and scope of supply shall be as confirmed in our techno-commercial offer. Minor customization can be offered based on customer requirements and technical feasibility.
Have a part that needs precision most machines can't hold? Let's talk specifications.
Precision grinding and machining systems engineered for the industries that cannot compromise on tolerance.